background image

5

Playing a game

1

Press 

§

 (open) button.

The disc cover opens.

Insert a disc with the label side up.

Close the disc cover.

Press 

1

/

u

 (on/standby) button.

The 

1

/

u

 indicator lights up.

After the start-up screen, screen 

C

1

appears and the game begins.

Set the supplied Analog Controller to the
appropriate mode for the software 

(see page 6)

.

Tips

• When you end a game, press 

§

, remove a disc and

press 

1

/

u

 to turn off the “PlayStation”.

• If you turn on your “PlayStation” without first

inserting a disc, screen 

C

2

 appears.  It gives you

access to the audio CD control screen and the Memory
Card activity screen, described later on in this manual.
If you insert a CD-ROM disc of the “PlayStation”
format while screen 

C

2

 is on, the game will start

automatically.

• If the screen 

C

3

 appears, the inserted disc might be

of a different format.  Check if it has both the
“PlayStation” logo and 

[PAL]

 designation on it.  A

damaged or dirty disc would also produce this screen.

See ”Troubleshooting“ on page 10.

Notes

• There is no need to turn off the “PlayStation” if you

want to change games.  Just open the disc cover and
wait until the disc stops spinning, swap the discs over
and then press RESET.

• When inserting a disc, push the disc gently but firmly

until it sits snugly on the central spindle.

M

WARNING

Before removing a disc, press the 

§

 button and make sure

that the disc completely stops.
Never touch the disc while it is spinning.  Otherwise, you
may hurt yourself or damage the disc or your
“PlayStation”.

2

3

1

C

A

 Restarting a game

Press RESET.
Be careful not to press RESET while playing the
game, or the game will end.

B

 Removing a disc

Press 

§

.

While pressing the central spindle gently, pick
up the disc holding the edge.

C

 Screens that appear after

the start-up screen

When you turn on your “PlayStation”, one of
the following screens will appear.

1

A CD-ROM with both “PlayStation” logo
and 

[PAL]

 designation is inserted.

2

No disc is inserted.

3

A disc that cannot be played with the
“PlayStation” is inserted.

2

RESET

4

3

A

B

§

Summary of Contents for PlayStation SCPH-7502A















Reviews: