20
Front Panel
Chap
te
r 2
Name
s
an
d
F
u
nc
tio
n
s
o
f P
a
rts
setup menu item 101 SELECTION FOR SEARCH DIAL
ENABLE to “dial”).
e
Shuttle dial
Turn this for playback in shuttle mode or variable speed
mode. Turn clockwise for forward direction playback, and
counterclockwise for reverse direction playback.
• In shuttle mode, the playback speed varies in the range
±20 times normal speed or in the maximum speed range
(as selected by an extended menu setting), according to
the angular position of the shuttle dial.
1)
• In variable speed mode, you can finely adjust the
playback speed from –2 to +2 times normal speed,
according to the angular position of the shuttle dial.
The shuttle dial has a detent at the center position, for still
image playback.
Normally, you press the SHTL/JOG button before turning
the shuttle dial, but it is also possible to make a setting to
enable shuttle mode directly by turning the dial (set setup
menu item 101 SELECTION FOR SEARCH DIAL
ENABLE to “dial”).
1) Maximum speed is about ±50 times normal speed. However, the
maximum speed may vary depending on the state of the clip and the
playback position on the disc.
When setup menu item 101 SELECTION FOR SEARCH
DIAL ENABLE is set to “dial”, after using the shuttle dial,
return it to the center position. If the shuttle dial is not in
the center position, it is possible occasionally for vibration
from other operations to activate the dial, and start
playback in shuttle mode.
4
Display/menu control section
a
Function buttons (F1 to F6)
These buttons are enabled when the function menu
is visible. Each press of a button changes the
setting of the corresponding item in the menu.
For convenience, this manual refers to these buttons as
buttons F1 to F6, in order from the top.
b
Display
Displays menus, audio level meters, and data such as time
data or clip information. The DISPLAY button lets you
switch to the video monitor display.
For details, see “Display window” on page 23.
c
PUSH SET(S.SEL) knob
Use for menu and GUI screen operations. Turn the knob to
select items, and press it to confirm the selection. This
button is also used to set numerical and timecode values.
You can also change the playback speed by pressing the
PLAY button and turning this knob during playback
See “GUI screen operations” (page 75) for more
information about how to use the thumbnail screens.
d
MENU button
Displays the setup menu or the GUI screen menu. The
setup menu appears when no GUI screen is visible. The
same information is also superimposed on the display on a
Note
1
Function buttons (F1 to F6)
2
Display
3
PUSH SET(S.SEL) knob
4
MENU button
5
RESET/RETURN button
7
THUMBNAIL button and indicator
6
SUB CLIP/DISC MENU button and
indicator
8
DISPLAY button
9
SHIFT button
0
PAGE/HOME button
qa
EXPAND button
qs
CHAPTER button
