69
System Menu
C
h
ap
te
r 6
M
enu
s
SYSTEM SEL [> System
Sel]:
Select the system
frequency and area of
use.
Note
After changing any of the sub-
items, power the unit off and
then power it on again. The
initial settings of the setup
menu as a whole will change
to reflect the settings made
here.
SYSTEM FREQ [>> Sys
Freq]:
Select the system
frequency.
*
60I [>>> 60i]:
59.94i
50I [>>> 50i]:
50i
30P [>>> 30P]:
29.97P
25P [>>> 25P]:
25P
UC/J [>> UC/J]:
Select the
area of use.
UC [>>> UC]:
For areas outside Japan
*
J [>>> J]:
For Japan
VAR SPD LIMIT [> VAR limit]:
Specify whether to limit the
speed of variable speed playback
*
OFF [>> OFF]:
–1 to +2 times normal speed
ON [>> ON]:
0 to +1 times normal speed
ASM POSTROLL [> Postroll]:
Specify whether to record
postroll when executing assemble editing
OFF [>> OFF]:
Do not record postroll.
*
ON [>> ON]:
Record postroll.
DISPLAY CONTROL [Display]: Settings related to display
on the LCD panel of this unit and on an external monitor
Description
SUB STATUS [> Sub status]:
Select the supplementary
status information shown in the monitor video section and
on an external monitor.
*
OFF [>> OFF]:
No supplementary status information
TC MODE [>> TC mode]:
Indications of the operating mode of
internal timecode generator
REMAIN [>> Remain]:
Free capacity on the disc (in minute
units)
CLIP NO [>> Clp No]:
Clip number
PLAYBACK REMAIN [>> PB remain]:
Time from the current
playback position to the recording end position, displayed
in time data format
For details of supplementary status information displayed on
the monitor when a setting other than OFF is selected, see
“Displaying Supplementary Status Information” (page 30) in
Chapter 2.
BRIGHTNESS [> Brightness]:
Adjust the brightness of the
display.
The LCD BRIGHTNESS screen appears.
Factory default setting:
*
55
See page 28 “Adjusting the Brightness of the LCD Panel” for
more information about how to adjust the brightness.
ALARM [> ALARM]:
Select whether to display alarm
messages.
OFF [>> OFF]:
In general, do not display alarm messages.
However, do display some important alarm messages.
ON(LIMITED) [>> ON(Limit)]:
Display a minimum number of
alarm messages.
*
ON [>> ON]:
Display all alarm messages.
HD CHARA [> HD cha]:
Specify whether, when CHAR SEL
on page P1 of the function menu is set to “ON”, to forcibly
turn off superimposition of text information on HD output.
OFF [>> OFF]:
Forcibly turn off superimposition of text
information.
*
FUNCTION MENU [>> F-MENU]:
Do not forcibly turn off
superimposition of text information. (The setting of CHAR
SEL in the function menu takes priority.)
VIDEO CONTROL [Video]: Settings related to video
control
Description
FRAME PB [> Frame PB]:
Select whether to output fields or
frames as still images of video.
*
AUTO [>> AUTO]:
Output a field image when the format is
interlaced, and output a frame image when the format is
progressive.
FRAME[>> FRAME]:
Always output a frame image.
OPERATIONAL FUNCTION [Operational]: Operation
settings
Description
Summary of Contents for PDW-70MD
Page 92: ...Sony Corporation ...
