47
5-3 Details of Functions
Chap
te
r 5
U
s
in
g t
h
e
Ut
ilit
y S
o
ftw
a
re
Indication that a setting is at the
factory default value
When a setting is at the factory default
value, a colon (‘:’) appears between the
item name and the setting value.
When the setting has been changed, this
changes to a dot (‘.’).
Example:
PREROLL TIME : 5 SEC
(setting is factory default)
PREROLL TIME . 8 SEC (setting has
been changed)
AV setting operations
To move from one menu item to another:
Use the
V
/
v
buttons, or the up and
down arrow keys on the keyboard.
To move from one menu level to another:
Use the
B
/
b
buttons, or the left and
right arrow keys on the keyboard.
To change the setting value:
With the
cursor on the setting value, use the
V
/
v
buttons, or the up and down arrow keys
on the keyboard. (Factory default
settings are shown with an asterisk
(*).)
To return a setting to its factory default
value:
In the setting value selection
screen, click the Reset button.
To return all settings to their factory
default values:
In the menu item
selection screen, click the Reset
button.
To save the changed settings:
Click the
Set button.
To discard the changed settings:
Click the
Cancel button, or press the Esc key on
the keyboard.
To change the line mode setting on
a Windows computer
1
Refer to “AV setting operations”
(previous item)
, and change the line
mode setting.
2
Click the Set button.
If a disc is present, it is automatically
ejected.
3
In the confirmation message box, click
the OK button.
4
5
Do one of the following on the
or
icon displayed in the remote
computer’s taskbar.
• Double click.
• Right click, and select “Safely
Remove Hardware” from the menu
which appears.
The “Safely Remove Hardware”
dialog appears.
6
Select “Sony XDCAM PDW-D1 IEEE
1394 SBP2 Device” and click Stop.
The “Stop a Hardware device” dialog
appears.
7
Select “Sony XDCAM PDW-D1 IEEE
1394 SBP2 Device” and click OK.
In Windows XP, “Sony XDCAM
PDW-D1 IEEE 1394 SBP2 Device” is
deleted from the list of “hardware
devices”.
In Windows Vista, the message “This
device can be safely removed from
your computer.” appears.
8
Power the unit off, and then power it
on again.
Line mode setting
Item name
Settings
525/625
SYSTEM
SELECT
Switch between 525-
line and 625-line
modes.
525:
525-line mode
(NTSC)
625:
625-line mode
(PAL)
