DISASSEMBLY
DISASSEMBLY
– 17 –
qd
SWITCHING POWER
Removal procedure
3
6
5
Switching power
4
2
1
UL tape
Attach the UL tape
1
to
secure the harness as
shown in the right picture.
UL tape
1
Peel off the UL tape.
3
Remove the
two screws
and remove
the duct (L).
Duct (L)
SLIMIDE BOARD
SWITCHING
POWER
P1
P2
P3
MOTHER
BOARD
HDD
Duct (R)
4
Disconnect the connector.
5
Remove the Switching
power supply unit in the
direction of the arrow.
6
Remove the
screw, and
remove the
duct (R) from
the Switching
power.
2
Remove the
two screws.
+K (3 X 8)
7-682-248-04
Silver
+B (3 X 6)
7-682-547-09
Black
+B (3 X 6)
7-682-547-09
Black
13
