DISASSEMBLY
DISASSEMBLY
– 16 –
qs
CPU
Removal procedure
A
1
Grease
(on the entire surface
of heat splitter)
2
CPU
To replace the CPU or heat sink (in case that CPU
is equipped with heat sink), install new CPU or
heat sink after thermal dissipation grease is wiped
off and apply the grease to the position shown
in the figure.
Thermal dissipation grease: Silicon compound
(G-765) 90G
Amount of application: 0.5 g (equivalent to twice
the size a wooden safety
match head)
∗
Take care not to apply the grease to any other
places because it has high conductivity.
1
Raise the lever in the
direction of the arrow
A
.
2
Pull the CPU straight up
and remove it.
12
