DISASSEMBLY
DISASSEMBLY
– 15 –
qa
DC FAN (WITH HEAT SINK)
B
B
B
Removal procedure
Clip
When assembling,
make sure that the
clips securely hook
on the sockets.
Clips
Sockets
DC fan
(with heat sink)
2
3
1
B
A
A
1
Remove the connector.
3
Raise the DC fan
(with heat sink) in the
direction of the arrow
B
and remove it.
2
Press the clips in the
direction of the arrow
A
to release the lock and
remove the clips.
Heat sink
Retention module
CPU
To remove the heat sink, raise the CPU straight up from
the Retention module. However, there can be a case that
the CPU has adhered to the heat sink. In such a case, raise
the CPU straight up from the Retention module being careful
that the CPU pins must not be bent.
Then warm up the CPU and heat sink using a hair dryer or
the like, and then separate the CPU from the heat sink by
inserting a spatula in between them. While executing this
work, do not apply excessive heat to CPU. Also be careful
not to apply excessive force to CPU with spatula.
11
