DISASSEMBLY
DISASSEMBLY
– 11 –
7
MAIN UNIT-1
Removal procedure
3
3
Remove the four screws.
To next page
Cable clamp
UL tape
Harness
(IDE HDD)
Harness (AUDIO RELAY)
Secure the harness (AUDIO RELAY)
with the UL tape.
Secure the harness (AUDIO) with the cable clamp.
The harness that comes from the
switching power supply unit.
When assembling, route the
wires as shown in the right picture.
Harness
(AUDIO)
1
1
Disconnect the harness
from the cable clamp.
2
2
Peel off the UL tape.
+B (3 X 6)
7-682-547-09
Black
7
8
