Sony PCV-RX501 Software Manual Download | Manualshive

Page: 82 / 129

background image

Softwar

e

Guide

Using Click to DVD

81

❑

Defragment your hard disk drive. Optimise (defragment) the hard disk on which you store the working
files for Click to DVD and Click to DVD Automatic Mode.
For details on how to optimise (defragment) your hard disk, refer to the relevant section in your
Windows

®

online help.

❑

Disable your computer's network adapter. If your computer is connected to a network, disconnect it by
unplugging the network cable from the network adapter or by disabling the network adapter.

❑

Stop scheduled tasks. Stop any scheduled tasks that might run while you are using Click to DVD and Click
to DVD Automatic Mode.

❑

Stop automatic updates: stop any automatic updates that might occur while you are using Click to DVD
and Click to DVD Automatic Mode.

❑

Virtual memory settings: Optimise the system's performance settings.

Notes on creating DVDs

❑

Use the Click to DVD Project Administration Tool to help you manage your files (see

Managing project

files with Click to DVD Project Administration Tool

❑

See the Click to DVD Readme file for devices that support Click to DVD and Click to DVD Automatic
Mode.

❑

To transfer a specific video segment or to edit your video, use the full Click to DVD software, rather than
the Click to DVD Automatic Mode software.

❑

Use an i.LINK™ cable to connect DV devices to the computer. Click to DVD and Click to DVD Automatic
Mode will not work if you use a USB cable to make this connection.

❑

When loading images from a device, do not turn off or unplug the device, and do not operate any of its
controls.

❑

The video and audio compression method used by Click to DVD varies according to recording time. When
recording time exceeds the DVD capacity, audio is first compressed to AC-3 format. If the recording still
exceeds DVD capacity, the video bit rate is reduced.

«
...
80
81
82
83
84
...
»

Summary of Contents for PCV-RX501


































































































































Reviews:

No comments

Related manuals for PCV-RX501

Brand: Acer Pages: 20

Brand: Acer Pages: 20

Brand: Acer Pages: 18

Brand: Acer Pages: 30

PowerBox 310 Series

Brand: Spectra Pages: 116

Brand: EUROCOM Pages: 113

Brand: IEI Technology Pages: 165

Brand: GARANT Pages: 60

Flex Insight XMS

Brand: Spectrum Industries Pages: 11

8000 - Elite Convertible Minitower PC

Brand: Compaq Pages: 35

1850R - ProLiant - 128 MB RAM

Brand: Compaq Pages: 12

Professional AP400

Brand: Compaq Pages: 13

Presario Series

Brand: Compaq Pages: 12

AvalonMiner 1066 Pro

Brand: Canaan Pages: 19

Valerus Shadow Elite Client Workstation Micro Form Factor

Brand: Vicon Pages: 2

Brand: Alpha Microsystems Pages: 110

Brand: Texas Instruments Pages: 242

Brand: PRÜFTECHNIK Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands