199
Adjusting the Picture Quality of the Display
C
h
apt
er
7:
C
o
m
p
u
te
r D
is
p
la
y
Fu
nct
ion
If the aspect ratio of the input signal from the computer is 16:9 or wider, this setting is
fixed at “Full1”.
V Center
Adjust the vertical position of the picture.
This setting may be disabled depending on the input signal.
Adjust Signal
APA
Automatically adjust phase, pitch, and shift to optimal values for the picture
signal input from the computer (auto pixel alignment).
Phase
Adjust pixel and computer signal positions. Set the value that produces the
clearest picture.
Pitch
Adjust the horizontal size of the picture. Set a value that matches the pixel
count of the input signal.
Shift
Adjust the picture position.
H:
Adjust the horizontal position. Increasing the value moves the picture to the
right, while decreasing the value moves it to the left.
V:
Adjust the vertical position. Increasing the value moves the picture upward,
while decreasing the value moves it downward.
Power Saving
On:
When no RGB input signal is detected and there are no key operations for
10 minutes, the system automatically enters power saving mode.
Off:
The system does not enter power saving mode, even if an RGB input
signal is not detected and key operations are not performed for prolonged
periods.
This function is disabled during videoconference picture display and two-picture
display.
Note
Note
Setup menu
Note
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
