187
Using the Display Control
C
h
ap
te
r 6:
M
u
lti
p
oi
nt
C
onn
ec
tion
A Broadcast:
Broadcasts the picture of the terminal connected first in
broadcast select mode.
B Broadcast:
Broadcasts the picture of the terminal connected second in
broadcast select mode.
To display the local picture in “Voice Activate” mode
You can display the local picture only on your monitor screen even if “Voice
Activate” mode is activated. All other terminals remain in “Voice Activate”
mode.
1
Press the LAYOUT button on the Remote Commander to display the
Layout menu.
The instruction “F1: Switches the monitored picture between the remote
and local sites.” appears in the lower part of the screen.
2
Press the F1 button on the Remote Commander.
The local picture appears on your monitor screen.
To restore “Voice Activate” mode on the local site
Press the F1 button on the Remote Commander again.
When you receive the “Self Broadcast” command from one of the terminals
connected, the picture of that terminal is broadcast in full screen.
When you receive the “Stop Broadcast” command from one of the terminals
connected, the system returns to the previous mode.
If you have received the “Self Broadcast” command from another terminal, the
operation above will not be carried out.
Receiving the Broadcast Requested From Another Terminal
Note
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
