162
Communicating without the Picture – Voice Meeting
Communicating without the Picture –
Voice Meeting
The Visual Communication System enables a voice only communication using
telephones via an ISDN line. (Voice Meeting)
Basic connecting procedures are the same as those for normal communication
with audio/video.
If “Lens Cover Mic On/Off Function” is set to “On”, the microphone will turn off when
the lens cover is closed.
Conducting a voice meeting with a remote party not registered in the phone
book
Set “Line I/F” to “TEL” in the Detailed Dial menu.
During the Voice Meeting, the “Voice Only” indicator is displayed.
For “Line I/F” setting, see “Calling a Remote Party Not Registered in the
Phone Book” on page 105.
To register a remote party for a Voice Meeting
Set “Line I/F” to “TEL” in the List Edit menu displayed from the Phone Book.
For registration, see “Registering a Remote Party – Phone Book” on page
112.
To set the audio compression format
Select the audio compression format by setting “Telephone Mode” of the Dial
setup menu.
When you initiate the voice meeting, set “Telephone Mode” to “Auto” (page
57). When set to “Auto”, the G.711 µ-law format is automatically selected.
You need not set the audio compression format when receiving a call for a
Voice Meeting from the remote party.
Note
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
