142
Using the Computer Picture for Presentation
To configure the presentation mode
When you transmit an RGB picture from a computer, etc. and a camera picture
simultaneously to a remote party, the remote party can view both pictures
simultaneously. This function is called “to make a presentation using the
presentation mode complying with H.239”. Using this function allows smooth
reproduction of both camera and computer pictures. To make a presentation
using the presentation mode complying with H.239, it is necessary to turn on
the presentation mode on both the local and remote systems. If the presentation
mode on either of the systems is turned off, a presentation complying with
H.239 cannot be made.
To configure the presentation mode, set “H.239” to “On” on the IP: Mode page
(page 59) or on the ISDN: Mode page (page 61) of the Communication setup
menu.
To start a presentation
1
Press the TOOLS button on the Remote Commander to open the Tools
menu.
2
Press the
b
button on the Remote Commander and press the
V
,
v
,
B
or
b
button to select “Execute” for “Presentation”.
The RGB picture from the computer is transmitted to the remote party.
While presentation is being executed, the message “Executing” appears on
the screen.
You can also transmit the computer picture to the remote party by pressing the
PRESENTATION button on the Remote Commander instead of performing steps
1 and 2 above.
Making a Presentation
Note
Presentation
Streaming
Recording
Annotation
[Executing]
[Suspended]
[Suspended]
[Suspended]
Icon display
Reject Answer
Screen Capture
Tools
Machine Status
Setup
Home
On
Off
Execute
Execute
Execute
Execute
Stop
Summary of Contents for PCSXL55
Page 261: ...Sony Corporation ...
