78
Registering Local Information
For the PCS-XG100/XG100S
The options that can be selected vary with
the Audio Input setting.
When you select “MIC” from “Audio
Input”, you can select one of the following
three options. When you select “AUX”, you
can select “AUDIO 1” or “AUDIO 2”.
When you select “MIC+AUX”, you can
select two options: one microphone input
from “MIC (A1)”, “AUDIO 1” or “AUDIO
2”, and one auxiliary external input from
“AUDIO 1” or “AUDIO 2”.
MIC (A1):
Select use of the PCS-A1
microphone (supplied) connected to the
MIC (A1) jacks on the Communication
System.
AUDIO 1:
Select to input the audio of
external equipment connected to the
AUDIO 1 IN jacks on the
Communication System.
AUDIO 2:
Select to input the audio of
external equipment connected to the
AUDIO 2 IN jacks on the
Communication System.
For the PCS-XG77/XG77S
The options that can be selected vary with
the Audio Input setting.
When you select “MIC” from “Audio
Input”, you can select one of the following
three options. When you select “AUX”, you
can select “AUDIO 1” or “AUDIO 2”.
When you select “MIC+AUX”, you can
select two options: one microphone input
from “MIC (A1)”, “AUDIO 1” or “AUDIO
2”, and one auxiliary external input from
“AUDIO 1” or “AUDIO 2”.
MIC (A1):
Select use of the PCS-A1
microphone (supplied) connected to the
MIC (A1) jacks on the Communication
System.
AUDIO 1:
Select to input the audio of
external equipment connected to the
AUDIO 1 IN jacks on the
Communication System.
AUDIO 2:
Select to input the audio of
external equipment connected to the
AUDIO 2 IN jacks on the
Communication System.
The LAN setup menu is used to set up LAN
connection.
For details about the settings, consult your
network administrator.
• The contents of the LAN setup menu vary
with the “Use LAN2” setting in the Line
Interface setup menu, or “Internet Protocol”
setting in the Administrator setup menu.
The LAN page number after the LAN2 page
also varies according to the number of setting
items.
• The menu displays and references to
“LAN1” will be simply “LAN” on the
PCS-XG77/XG77S.
Basic Setup:
LAN1
Host Name
Enter your host name (up to 30 characters).
DHCP Mode
Allows you to select whether the Dynamic
Host Configuration Protocol (DHCP) server
is enabled.
Auto:
The IP address, network mask,
gateway address and DNS address are
automatically assigned.
Off:
Disables the DHCP server. In this case,
enter an IP address, network mask,
gateway address and DNS address.
Prefix Length
Configure the prefix length of the IPv6
address within the range of 0 to 128.
IP Address
Enter the IP address.
Network Mask
Enter the network mask.
Gateway Address
Enter the default gateway address.
LAN Setup Menu
Notes
LAN
