25
System Components
C
h
apt
er
1:
In
st
al
la
tio
n
and
Pr
e
par
at
io
n
Optional equipment especially designed for use with the Communication
System
The following optional devices are used to enhance your videoconference.
VGP-AC19V45 AC adaptor
Supplies power to the Communication System.
PCS-A1 Microphone
Omni-directional microphone that picks up sound
relatively from all directions, allowing participants to
speak from any location. It is recommended to use in
a quiet situation (one piece supplied).
Optional Equipment
Unit
Description
PCSA-B384S ISDN Unit
Used to connect to an ISDN line. Up to three ISDN
lines; 6B channels usable.
ISDN is supported in version 1.41 and later.
PCSA-B768S ISDN Unit
Used to connect to an ISDN line. Up to six ISDN
lines; 12B channels usable.
ISDN is supported in version 1.41 and later.
PCSA-MCG106/MCG109
HD MCU Software
Software required for multipoint connection using
LAN or/and ISDN.
Multipoint connections in which the PCS-XG77/
XG77S serves as the main terminal is supported in
version 1.41 and later. However, only the
PCSA-MCG106 HD MCU software can be installed
on the PCS-XG77/XG77S.
PCSA-RXG77 HD Upgrade
Software
Use this to enable transmission and reception of
progressive video signals with a resolution of 1920 ×
1080 on the PCS-XG77/XG77S.
When installed, the software allows transmission and
reception at a maximum of 60 frames per second.
This software cannot be installed on the
PCS-XG100/XG100S.
Unit
Description
Note
Note
Note
Note