199
Configuring Multipoint
C
h
ap
te
r 6:
M
u
lti
p
oi
nt
C
onn
ec
tion
To register a multipoint connection list in the Phone Book
The basic procedure for registration is the same as when registering a remote
party for a point-to-point connection. For details on the procedure, see
“Registering a New Remote Party” on page 130.
1
Select “New Entry” in the Phone Book to display the List Edit menu, then
enter the name of the multipoint connection list in the Index text box.
2
Select “Number of Connected Sites” and select the number of sites to
which you want to connect.
The “Dial to:” text boxes that correspond to the selected numbers of sites
are displayed.
3
Select the line interface icon or a still image to be displayed in the Phone
Book.
You can select “
” as an icon for a multipoint connection list.
4
Set up the line interface of the remote parties you want to register in a
multipoint connection list in the “Dial to:” text boxes.
Select the line interface from the drop-down list on the left, and enter the
number of a remote party in the text box.
For LAN connection:
Select “IP” from the drop-down list (when using the
1 connector), and enter the IP address.
For ISDN connection:
Select “ISDN” from the drop-down list, and enter
the line number.
For ISDN (Telephone) connection:
Select “TEL” from the drop-down
list, and enter the telephone number. (ex. : 0390123456).
Phone Book
Group Select
One-Touch Dial Specified
Number of Connected Sites
Line I/F
Communication Bit Rate
Number of Lines
Dial to:
Index
IP
None Specified
None Specified
1
IP
1Mbps
28(128K)
Cancel
Save
MULTI LIST
Phone Book
Group Select
One-Touch Dial Specified
Number of Connected Sites
Line I/F
Communication Bit Rate
Number of Lines
Dial to:
Index
IP
Dial to:
IP
Dial to:
IP
None Specified
None Specified
3
IP
1Mbps
28(128K)
Cancel
Save
MULTI LIST
