112
Setting Up the Network Configurations
To connect to a remote party
Select “IP” under “Line I/F”, enter the remote party’s IP address, and dial.
ISDN is supported in version 1.41 and later.
1
Enter the appropriate numbers for “Area Code” and “Local Number” in the
Telephone Number page of the ISDN setup menu.
Do not enter the first 0 of the area code.
For details on the ISDN setup menu, see “ISDN Setup Menu” (page 85).
For details on configurations, consult with the system administrator.
The setting has been configured properly if the correct line number appears
in the Home menu.
2
Remote parties must configure in the same way.
When connecting to the ISDN unit, use the ports in ascending order.
Yes: 1, 2, 3…
No: 1, 6, 5…
To connect to a remote party
Select “ISDN” under “Line I/F”, enter the remote party’s line number, and
dial.
For details on how to start a visual communication, see “Starting a
Connection by Calling a Remote Party” (page 116).
ISDN Connections
Note
Note
Note
ISDN2
A1
A2
B3
B2
C1
C2
Auto SPID
Cancel
Save
Execute
Area Code
Local Number
Setup
Number
ISDN
