111
Setting Up the Network Configurations
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
When using PPPoE, you can use your Internet service provider’s services
without using a router.
Configuration example
1
Set “PPPoE” to “LAN1” or “LAN2” under the PPPoE page in the LAN
setup menu, and enter the PPPoE user name and PPPoE password given to
you by the provider.
• The “LAN1” setting is called the “On” setting on the PCS-XG77/XG77S.
• The “LAN2” setting is not available on the PCS-XG77/XG77S.
2
If you have a fixed IP from the provider, set “Fixed IP for PPPoE” to “On”,
and enter your fixed IP address for PPPoE in “Fixed IP Address for
PPPoE” under the PPPoE page in the LAN setup menu.
The setting has been configured properly if the correct IP address appears
in the Home menu.
If the fixed DNS server address is specified by the provider, set “DNS” to
“Specify”, and enter the specific addresses in “Primary DNS” and “Secondary
DNS”.
3
Remote parties must configure in the same way.
LAN Connection Using PPPoE (LAN1/LAN2)
Notes
Note
ONU
211.10.10.10
Internet
service
Internet
service
ONU
210.10.10.10
Local IP
network
Internet
Setup
PPPoE
LAN
PPPoE
User Alias
Password
Fixed IP for PPPoE
Fixed IP Address for PPPoE
DNS
Primary DNS
Secondary DNS
LAN1
Cancel
Save
Obtain automatically
abcdefg
On
210. 10. 10. 10
LAN2
