Sony PCS-VCS Operating Instructions Manual Download Page 83

Page: 83 / 99

Sony PCS-XG/XL/XA Series Firmware Update Function

r 10:

Add

iti

on
al

onf

rat

Select the firmware to be updated from the [Select Firmware Update File]
pull-down menu, and click the [Update Firmware] button.
The confirmation screen will be displayed.

Confirm the details of the confirmation screen, and execute [Update
Firmware].

When the Sony PCS-XG/XL/XA Series firmware update is executed,
firmware update and update completion status are displayed.

Status Display

Status Column

Description

Blank

Initial firmware update execution screen

Updating

The firmware update is being executed

Upload was
completed
normally

Confirms completion of update. However, it is displayed when
the firmware file has been forwarded.

Status Error!
Communicating

An error displayed when update is executed while Sony PCS-XG/
XL/XA Series is busy.

java.net.Connect
Exception:
Connection
refused

Error when connection could not be completed. It is displayed for
errors arising from executions routed through SECURE
TRANSPORT.

Summary of Contents for PCS-VCS




































































































Search results

Summary of Contents for PCS-VCS

Reviews:

Related manuals for PCS-VCS

Brands by name

Popular brands

Sony PCS-VCS, Operating Instructions Manual

Search results

Summary of Contents for PCS-VCS

Reviews:

Related manuals for PCS-VCS

Brands by name

Popular brands