Sony PCS-1600 Operating Instructions Manual Download Page 13

Page: 13 / 171

Chapter 1

Preparation

Chapter 1

System Configuration

Contains the video codec, audio codec,
echo canceler, network interfaces and
system controller.
This unit has an integral-type camera
and microphone.

Controls the Compact Processor.
This can also be used to operate a Sony
TV monitor.

Provides the power supply to the
Compact Processor.

Unit

Description

PCS-P160/P160P
Compact Processor
PCS-C160/C160P
Camera

PCS-R160
Remote Commander

PCS-AC15
AC adaptor

The PCS-1600/1600P Compact Conference Package is a basic
system that can be enhanced with variety of optional
equipment.

Basic System Equipment

The PCS-1600/1600P Compact Conference Package forms the
basis of the PCS-1600 series system.
The PCS-1600/1600P Compact Conference Package consists
of the following units:

Summary of Contents for PCS-1600












































































































































































Search results

Summary of Contents for PCS-1600

Reviews:

Sony PCS-1600, Operating Instructions Manual, Page: 13 / 171

Search results

Summary of Contents for PCS-1600

Reviews: