Sony PCM-M10 Operating Instructions Manual Download Page 69

Page: 69 / 120

Ed
itin
g

cks

Press

FF/

FR/

to select

“Execute,” and then press

PLAY/

ENTER.

“Dividing...” appears, and the track is
divided at all the track mark positions.
The tracks divided from a single track
will be suffixed with a sequential number
(_1 and so on).

Press

STOP to exit the menu mode.

To play a divided track

Press

FF/

FR/

to display

the track number, as the divided tracks now
each have different track numbers.

Tip

To cancel division during the operation at all
the remaining track marks, press

STOP

The tracks that have been divided before the
cancellation remain divided.

Deleting all tracks in a folder

Note

If the selected folder contains a protected
track, you cannot delete the track.

Track1

Track1_1 Track1_2 Track1_3

A suffix made up of a sequential number is
added each of the divided files.

A track is divided.

PLAY/

ENTER

FF/

FR/

STOP

Summary of Contents for PCM-M10

























































































































Search results

Summary of Contents for PCM-M10

Reviews:

Related manuals for PCM-M10

Brands by name

Popular brands

Sony PCM-M10, Operating Instructions Manual

Search results

Summary of Contents for PCM-M10

Reviews:

Related manuals for PCM-M10

Brands by name

Popular brands