Sony PCG-V505AP User Manual Download Page 90

Page: 90 / 121

Sony Notebook

User Guide

Getting help

About the display

My LCD does not display anything

❑

Check that the computer and display are both plugged into a power source and that they are turned on.

❑

Check that the power indicator on the front panel of the computer is on.

❑

Check that the battery packs are inserted properly and that they are charged.

❑

Adjust the brightness of the LCD.

❑

The computer may be in LCD (video) standby mode. Press any key to activate the display.

❑

The display mode may be set to external display mode. Press and hold the

<Fn>

key while pressing

<F7>

several times.

The screen image on my external display is not centred or sized properly

Use the controls on your external display to adjust the image.

The window I have just closed continues to appear on my LCD

Press the

<Windows

key and

<D>

key twice to refresh the screen.

Summary of Contents for PCG-V505AP


























































































































Search results

Summary of Contents for PCG-V505AP

Reviews:

Related manuals for PCG-V505AP

Brands by name

Popular brands

Sony PCG-V505AP, User Manual

Search results

Summary of Contents for PCG-V505AP

Reviews:

Related manuals for PCG-V505AP

Brands by name

Popular brands