Sony PCG-GRZ615G User Manual Download Page 87

Page: 87 / 113

Sony

Notebook U

er Guide

Getting help

My mouse does not work

❑

If you are using an external serial PS/2 mouse, check that the mouse is plugged into the mouse connector
of your optional port replicator.

❑

If you are using an optional Sony USB mouse, check that the appropriate driver and software are
properly installed.

❑

Check that the USB mouse is plugged into the USB connector.

Can I burn an audio CD with SonicStage?

❑

It is possible to burn an audio CD using SonicStage with the built-in CD-R module.

SonicStage freezes each time I want to burn audio data on a CD

❑

Reinstall the software.

I cannot get SonicStage to detect the MagicGate Memory Stick™. The error message "External Device/Media
not found" appears

❑

Make sure your Memory Stick™ is inserted into the MagicGate Memory Stick™ slot rather than via the
PC Card slot.

Can I install the SonicStage software on other (non-Sony) computers?

❑

You cannot install SonicStage from the application CD onto a non-Sony computer.

✍

If you have any other problems regarding SonicStage, you can check the VAIO-Link website for a SonicStage update:

http://www.vaio-link.com

Summary of Contents for PCG-GRZ615G


















































































































Search results

Summary of Contents for PCG-GRZ615G

Reviews:

Related manuals for PCG-GRZ615G

Brands by name

Popular brands

Sony PCG-GRZ615G, User Manual

Search results

Summary of Contents for PCG-GRZ615G

Reviews:

Related manuals for PCG-GRZ615G

Brands by name

Popular brands