Sony PCG-F212 Page 36 User Manual Download

Page: 36 / 107

Using your notebook

Using the floppy disk drive

Sony

Not

book

Gui

To remove a diskette

When you finish using the diskette, wait until the LED indicator turns off and then
press the Eject button to remove the diskette.

To remove the floppy disk drive

Turn off the computer.

There is a RELEASE lever on the bottom of the computer. Slide this lever in the
direction of the arrow.

Slide the drive out of the multi-purpose bay.

Insert the weight saver.

See

Using the weight saver

page 53

Eject button

LED indicator

If you have difficulty removing a
diskette from the floppy disk
drive, remove the floppy disk drive
from the multi-purpose bay.

Do not press the Eject button
when the LED indicator is turned
on. Otherwise, data may be lost.

Drive RELEASE lever on bottom

Summary of Contents for PCG-F212












































































































Search results

Summary of Contents for PCG-F212

Reviews:

Related manuals for PCG-F212

Brands by name

Popular brands

Sony PCG-F212, User Manual

Search results

Summary of Contents for PCG-F212

Reviews:

Related manuals for PCG-F212

Brands by name

Popular brands