Sony PCG-9B1M Instruction & Operation Manual Download Page 85

Page: 85 / 116

Sony Not

book Us

Getting help

n N

The screen image on my external display is not centered or sized properly

Use the controls on your external display to adjust the image.

About CDs and diskettes

My CD-RW/DVD-ROM drive tray or DVD-ROM drive tray does not open

Make sure the computer is turned on.

Press the

eject

button on the drive.

If the

eject

button does not work, you can open the tray by inserting a sharp, pointed object into the hole to the

right or left of the

eject

button, depending on your model.

I cannot play a CD-ROM

After inserting the CD, wait for a few seconds for the system to detect it before you try to access it.

Make sure the label of the disc is facing up.

If the disc requires software, make sure the software is installed according to the instructions of the program.

Check the volume of your speakers.

Clean the disc.

Moisture condensation may have occurred. Leave the computer for at least 1 hour while it is turned on.

I cannot play a DVD-ROM

If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you are trying
to play is incompatible with the DVD-ROM drive in your notebook. The region code is listed on the packaging of
the disc.

Summary of Contents for PCG-9B1M





















































































































Search results

Summary of Contents for PCG-9B1M

Reviews:

Related manuals for PCG-9B1M

Brands by name

Popular brands

Sony PCG-9B1M, Instruction & Operation Manual

Search results

Summary of Contents for PCG-9B1M

Reviews:

Related manuals for PCG-9B1M

Brands by name

Popular brands