Sony PCG-9566 User Manual Download

Page: 79 / 102

Sony

not

book

r gui

Getting help

The window I have just closed continues to appear on my LCD

Press the

Windows

key and

key twice to refresh the screen.

I cannot switch from LCD display to TV and vice versa

If the DVD disk is inserted in the DVD-ROM drive, remove the disk.

About CD-ROMs and diskettes

My optical disk drive tray does not open

Make sure the computer is turned on.

Press the

Eject

button on the CD-RW/DVD-ROM drive.

If the

Eject

button does not work, you can open the tray by inserting a sharp, pointed object into the

hole to the right of the

Eject

button.

I cannot play a CD-ROM disk

Make sure the label of the disk is facing up.

If the disk requires software, make sure the software is installed according to the instructions of the
program.

Check the volume of your speakers.

Clean the disk.

Moisture condensation may have occurred. Leave the computer for at least 1 hour while it is turned on.

Summary of Contents for PCG-9566







































































































Search results

Summary of Contents for PCG-9566

Reviews:

Related manuals for PCG-9566

Brands by name

Popular brands

Sony PCG-9566, User Manual

Search results

Summary of Contents for PCG-9566

Reviews:

Related manuals for PCG-9566

Brands by name

Popular brands