background image

Sony Notebook 

User Guide

Getting help

103

n

N

About sound

My speakers are not producing sound

The built-in speakers may be turned off. Press 

<Fn>+<F3>

 to turn on the speakers.

The speaker volume may be turned to the minimum. Press 

<Fn>+<F4>

, and then press 

 

or 

 

to increase 

the volume.

If your computer is powered by battery, check that the battery is inserted properly and that it is charged.

If you are using an application that has its own volume control, check that the volume is turned up.

Check the volume controls in Windows

®

.

If you use external speakers, check that the speakers are properly connected and the volume is turned 
up. If the speakers have a mute button, make sure it is off. If batteries power the speakers, check that 
the batteries are inserted properly and that they are charged.

If you have connected an audio cable or a set of headphones to the headphone connector, disconnect 
the cable.

The sound of my notebook's fan is too loud

Use the 

PowerPanel

 utility to change the 

Thermal Control Strategy

 setting to 

Quiet

. This setting slows 

down the CPU speed. See PowerPanel Help for more information.

My microphone does not work

If you are using an external microphone, check that the microphone is plugged into the microphone 
connector correctly.

Summary of Contents for PCG-8D2M































































































































Reviews: