Sony PCG-871M Page 82 Instruction & Operation Manual Download

Page: 82 / 118

Sony Not

book Us

Connecting peripheral devices

Connecting an i.LINK™ device

Your computer includes an i.LINK

™

(IEEE1394) connector, which you can use to connect to an i.LINK

™

device

such as a digital video camera recorder or to connect two VAIO notebooks in order to copy, delete or edit
files.
The i.LINK

™

connector of your notebook does not supply power to external devices generally powered by

i.LINK

™

connectors.

The i.LINK

™

connector supports transfer rates up to 400 Mbps; however, the actual transfer rate depends

on the transfer rate of the external device.
The i.LINK

™

features available may vary depending on the software applications you use. Refer to the

documentation that came with your software for more information.
i.LINK

™

cables compatible with your VAIO notebook include cables with the following part numbers:

VMC-IL4415A (a 1.5 meter cable with a 4-pin connector at each end), VMC-IL4408Series (a 0.8 meter cable
with a 4-pin connector at each end).

Summary of Contents for PCG-871M























































































































Search results

Summary of Contents for PCG-871M

Reviews:

Related manuals for PCG-871M

Brands by name

Popular brands

Sony PCG-871M, Instruction & Operation Manual

Search results

Summary of Contents for PCG-871M

Reviews:

Related manuals for PCG-871M

Brands by name

Popular brands