Sony PCG-871M Instruction & Operation Manual Download

Page: 73 / 118

Sony Not

book Us

Connecting peripheral devices

Connecting a projector

You can use a projector as an external display, such as the Sony LCD Projector.

To connect a projector, proceed as follows:

Plug the RGB signal cable (1) into the monitor/VGA connector (2) identified by the symbol.

Plug the audio cable (3) (not supplied) into the earphone connector (4) identified by the

symbol.

Plug the RGB signal cable and the audio cable into the connectors of the projector (5).

Connect the power cord (6) of the projector into an AC outlet.

You may not be able to display the computer's LCD and the external display together, depending on the types of computer display and projector used.

You can toggle the output between the notebook LCD-screen and the external monitor by pressing the key combination

<Fn>+<F7>

Summary of Contents for PCG-871M























































































































Search results

Summary of Contents for PCG-871M

Reviews:

Related manuals for PCG-871M

Brands by name

Popular brands

Sony PCG-871M, Instruction & Operation Manual

Search results

Summary of Contents for PCG-871M

Reviews:

Related manuals for PCG-871M

Brands by name

Popular brands