43
3-3 Connections and Settings
Chapt
er
3
P
rep
ar
at
ions
• If an old version of the Optical Disc
Archive Software is already installed,
it must be uninstalled before you
install the new version. Use “Add or
Remove Programs” on the Control
Panel to remove the old version of the
Sony Optical Disc Archive Software.
After doing so, be sure to restart the
computer.
• After installation, the previous
settings return to their default values.
3-2-2
Macintosh
Installation
To install the Optical Disc
Archive Software and Utility
Software
Download the Optical Disc Archive
Software from the Sony Professional
Products site (page 36).
Installing the Optical Disc Archive
Software and utility software overwrites
a previous installation.
Settings are preserved after the new
installation.
3-3 Connections
and Settings
3-3-1
Connecting to a
Computer
By connecting this unit to a computer,
you can use the utility software, and the
other software.
For a connection example, see 1-2 “Example of
Use” (page 35).
• The Optical Disc Archive Software
must be installed in
advance.
• To disconnect the ODS-D55U from a
Windows computer, run the “Safely
Remove Hardware” dialog, and then
disconnect the cable.
• If you start a Windows computer with
the cartridge injected, the computer
may fail in normal operation or run
sluggishly.
• The computer may not start properly
if the unit’s power is on, depending
on the computer to which it is
connected. In this case, turn off the
power of this unit, or disconnect the
USB cable, and then start the
computer.
Notes
Note
Notes
