4-3.
Bottom Plate Assembly
4-3-1.
Bottom Plate (F) Assembly (ODS-D280F)
Preparation
1.
Remove the top cover assembly. (Refer to
Procedure
1.
Remove the two screws (B4 x 6), then remove the D280 mounting plate (F) assembly.
2.
Remove the two screws (B4 x 6), then remove the D280 mounting plate (RE).
3.
Remove the eight screws (B2.6 x 4), then remove the bottom plate (F) assembly.
4.
Remove the MC bottom packing R and MC bottom packing L.
B4 x 6
B4 x 6
B2.6 x 4
B2.6 x 4
B2.6 x 4
Upper side
MC bottom packing L
MC bottom packing R
D280 mounting plate (F)
assembly
D280 mounting plate (RE)
Bottom plate (F) assembly
5.
Install the removed parts by reversing the steps of removal.
4-3-2.
Bottom Plate (U) Assembly (ODS-D280U)
Preparation
1.
Remove the top cover assembly. (Refer to
ODS-D280U/ODS-D280F
4-3
Summary of Contents for ODS-D280F
