Sony NXCAM HXR-NX100, Operating Manual

Page: 90 / 120

90
(OTHERS) menu
Settings while recording or other basic
settings (AREA SET/BEEP, etc.)
The default settings are marked with
B
.
See page 72 for details on selecting
menu items.
See page 64.
You can save up to 99 camera profile
settings in a memory card and recall them at
any time for easy setup.
In addition, if you should require multiple
camcorders with the same settings, you can
load the desired settings to all cameras via
the memory card.
b
Notes
• Camera profiles for 50i models and 60i models
are not compatible.
• The file may not be shown properly if the file
name is changed on the computer, or the power
turned off during generation.
• Formatting the memory card also deletes saved
camera profiles.
z
Tip
• Items that can be saved include setting values
for menus, picture profiles, buttons, etc. You
can save these setting values all together in the
camera profile.
x
LOAD
Load the camera profile, and execute the
settings.
1
Select the camera profile to be loaded
with the
V / v / B / b /SET button.
2
Select [YES] on the confirmation
screen.
The camcorder restarts, and the loaded
camera profile becomes effective.
Press the MENU button
t
select
(OTHERS) with the V / v / B / b /SET button.
STATUS CHECK
CAMERA PROFILE
b
Note
• A camera profile saved on a camcorder with
different model name, or edited on a computer
cannot be loaded.
x SAVE
You can save the camera profile.
1
Select [NEW FILE] or an existing
profile name with the
V
/
v
/
B
/
b
/SET
button.
2
Select [YES] on the confirmation
screen.
The camera profile is saved.
z Tips
• When you select [NEW FILE], the profile is
named [01] (when saving for the first time).
• If you select an existing camera profile, the
current setting values are overwritten.
• You cannot use a computer to edit saved
settings.
x DELETE
You can delete the saved camera profile.
1
Select the camera profile to be deleted
with the
V
/
v
/
B
/
b
/SET button.
2
Select [YES] on the confirmation
screen.
See page 58.
See page 22.
You can adjust the time difference without
stopping the clock. When you use your
camcorder abroad, you can adjust the clock
to the local time.
ASSIGN BUTTON
CLOCK SET
AREA SET