Specifications
7
GB
Mounting the IP Converter
Always install the IP converter with its
front panel facing up and its connector
panel facing down.
1
Slide the IP converter onto the monitor
bracket from the side.
2
Secure the IPC bracket with the
supplied screws (M4×8) while holding
the bracket to support it.
Specifications
Transport/storage environment
Temperature
–20 °C to +60 °C
(–4 °F to +140 °F)
Humidity
20% to 90% (no condensation
allowed)
Atmospheric pressure
700 hPa to 1,060 hPa
Dimensions
IPC bracket
Approx. 194 × 123 × 10 mm
(7
3
/
4
× 4
7
/
8
×
13
/
32
in.)
(W × H × D)
Monitor bracket
Approx. 80 × 120 × 39 mm
(3
1
/
4
× 4
3
/
4
× 1
9
/
16
in.)
(W × H × D), 2 mm (0.079 in.)
(thickness)
Combination of both brackets
Approx. 233 × 123 × 41 mm
(9
1
/
4
× 4
7
/
8
× 1
5
/
8
in.)
(W × H × D, excluding
protrusions)
Spacers
Approx.
φ
15 mm (0.59 in.)
(diameter), 2 mm (0.079 in.)
(thickness)
Mass
IPC bracket
Approx. 130 g (4.6 oz.)
Monitor bracket
Approx. 150 g (5.3 oz.)
Combination of both brackets
Approx. 285 g (10 oz.)
Spacer
Approx. 2 g (0.071 oz.)
Supplied accessories
Instructions for Use (1)
M4×8 screws (2)
M6×12 screws (2)
European Representative (1)
Caution
(When attaching the unit with the
monitor stand attached)
