Step 1: Installation
12
Step 1: Installation
Before setting up, be sure that the location for
installation provides sufficient space and strength to
support the unit.
The NSR-1200 weighs approx. 13.5 kg (29.8 lb.), the
NSR-1100 weighs approx. 12 kg (26.7 lb.), and the
NSR-1050H weighs approx. 11.5 kg (25.4 lb.). The
dimensions for the unit are as follows.
Top
When the front bezel is closed
When the front bezel is opened
You can install the unit on a rack using the optional rack
mounting kit.
Installation Without a Rack
Attach the provided rubber feet to the recorder.
Place the recorder upright so that the bottom surface is
visible. Then affix the adhesive surfaces of the rubber
feet on the bottom of the recorder as illustrated below.
16.9 in.
(430 mm)
16.4 in.
(417 mm)
3.4 in.
(87 mm)
16.9 in. (430 mm)
16.4 in. (417
mm)
16.4 in. (417 mm)
14.8 in. (377 mm)
1.6 in. (40 mm)
19.4 in. (494 mm)
4.6 in.
(117 mm)
4.2 in.
(106 mm)
14.8 in. (377 mm)
14.8 in. (377 mm)
4.0 in.
(102 mm)
18.9 in. (479 mm)
4.8 in.
(123 mm)
Rubber
foot
Remove
the film
Bottom of the unit
