23
•
When you carry or store the “Memory
Stick Duo,” put it in the case supplied with
it.
Note on LCD panel
Some stationary blue, red or green dots
may appear on the monitor. These are
called “bright spots,” and can happen with
any LCD. The LCD panel is precision-
manufactured with more than 99.99 % of
its segments functional. However, it is
possible that a small percentage (typically
0.01 %) of the segments may not light up
properly. This will not, however, interfere
with your viewing.
Maintenance
Cleaning the suction cup
If the surface of the suction cup gets dirty
and the attachment strength weakens,
wash and clean the surface of the suction
cup.
Before washing, be sure to detach the
suction cup part from the cradle following
the steps below.
1
Detach the suction cup from the
cradle.
2
Wash the surface of the suction cup
with water.
3
Allow the suction cup to air dry
completely.
Warning
• Never wash the suction cup without
detaching it from the cradle. Otherwise,
it may damage the cradle.
• Do not use cleanser. Wash only with
water.
• Be sure to dry the suction cup before
reattaching.
Notes
•
If the suction cup leaves a trace on the
windscreen, wipe with water.
•
The dashboard may leave an impression
on the surface of the suction cup,
however, it does not affect the attachment
strength.
continue to next page
t
