NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
GB
Oper
ations
Using the Play Timer
You can set the Play Timer to start playing a radio
program, an iPod, a USB device, or a CD at a
specified time (Play Timer function). Make sure
you have set the clock.
1
Prepare the sound source.
Select the sound source (radio, iPod, USB
device, or CD), and then press +/– to adjust
the volume.
2
Select [Settings] from the Home
menu.
3
Select [Play Timer].
4
Select [On].
The Play Timer setting display appears.
5
Set the starting time.
Press
/
to change the hour and press
ENTER. The cursor moves to the minute
setting. Do the same operation to set the
minute.
Press and hold
/
to change the parameter
sequentially.
6
Set the ending time.
Do the same operation as step 5 to set the
end time.
7
Select the source ([Tuner], [iPod],
[USB], or, [CD]) you want to play.
8
When “Confirm “Play Timer” settings.”
appears, select [OK].
To cancel the procedure
Select [Cancel] in step 8 or press HOME.
To go back to the previous display
Press BACK.
Notes
The Play Timer is erased if you disconnect the power
cord of the main unit.
If the unit is already turned on at the preset starting
time, the Play Timer will not be activated.
The Play Timer may not be activated depending on the
status of the connected iPod.
The ending time for the Play Timer cannot be the
same as the starting time.
