Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating, Operating Instructions Manual

Page: 52 / 240

52
-GB
Adding a track mark
You can add track marks so that the part
after the new track mark is counted as a
new track. The track numbers will
increase as follows.
You cannot add a track mark on a track
that has been checked-out from your
computer.
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
“MARK ON” appears in the display,
and a track mark is added. The track
number will increase by one.
z
The quick search function quickly searches for
specific track or position at which you wish to
add track mark. You can search the track or
position while monitoring either the track
number or name, or elapsed time (page 35).
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 31).
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
You cannot erase a track mark on a track
that has been checked-out from your
computer.
1
While playing the track with the track
mark you want to erase, press
X
to
pause.
1 3 4 2
2 3 1 4 5
Add a track mark
Track numbers increase
T MARK
1 3 4 2
1 3 2
Erase a track mark
Track numbers decrease
. / X
T MARK