Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 461 / 706

USO
RESTRITO
Executing Effects
461
Ch
a
p
te
r 13
K
e
y
fra
m
e
E
ffe
c
ts
A path selection window appears.
2
Press the indication for the desired path type, to select
it.
Executing Effects
CW: Rotate clockwise.
CCW: Rotate counterclockwise.
Short: The hue changes in whichever of the
clockwise and counterclockwise directions is
shorter.
Long: The hue changes in whichever of the
clockwise and counterclockwise directions is
longer.
Changing the path type for Xpt
1
Press the Xpt path type indication for the item that you
want to change.
A path selection window appears.
2
Press the indication for the desired path type, to select
it.
By means of the [RUN] button in the keyframe control
block, you can play an effect as a continuously varying
image. This is referred to as effect execution
(see page
440) .
It is also possible to execute an effect from the device control block, the standard type Flexi Pad control block or the Multifunction Flexi Pad control block.
For details, see “Names and Functions of Parts of the
Control Panel” in Chapter 2 (Volume 1).
Executing Effects in the Keyframe
Control Block
Effect execution section
Xpt Hold off: When replaying a keyframe,
change the inputs to the settings saved in memory.
Xpt Hold on: When replaying a keyframe, do
not change the inputs.
FF button
RUN button
REWIND button
Keyframe control block
Executing an effect automatically
1
Select the region in which you want to execute the
effect, using the region selection buttons in the
numeric keypad control block
(see page 444) .
2
With the numeric keypad, enter the number of the
register in which the effect you want to execute is
saved, and press the [ENTER] button to confirm.
This recalls the effect saved in the register.
3
In the keyframe control block, press the [RUN] button.
The [RUN] button lights amber and the effect is
executed automatically.