Sony MVS-8000X SystemMVS-7000X System, User Manual, Page: 235 / 706

USO
RESTRITO
Misc Menu Operations
235
Knob Parameter Adjustment Setting values
2 Transition
Rate Transition rate 0 to 999
(frames)
Ch
a
p
te
r 8
Co
lo
r B
a
c
k
g
ro
u
n
d
s
, Co
p
y
and
S
w
a
p
, a
n
d
O
th
e
r S
e
tt
in
g
s
Notes
When a clip transition is selected as the transition type, it
is not possible to change the transition rate in this menu.
To set the independent key transition rate
By way of example, the following is the procedure for
settings of keys 1 to 4 in the M/E-1 block.
1
Press in the list in the status area of the Misc
>Transition >Key/ME/FTB menu, to select M/E-1.
2
In the <Transition Rate> group, press [Key K1-K4].
To insert (on) or remove (off) keys individually, press
[Key(On) K1-K4] or [Key(Off) K1-K4].
3
Turn the knobs to set the number of frames.
Knob Parameter Adjustment Setting values
1 Key1 Trans
Rate Key 1 transition
rate 0 to 999
(frames)
2 Key2 Trans
Rate Key 2 transition
rate 0 to 999
(frames)
3
Key3 Trans
Rate Key 3 transition
rate 0 to 999
(frames)
4 Key4 Trans
Rate Key 4 transition
rate 0 to 999
(frames)
To set the fade-to-black transition rate in
the Transition >Key/ME/FTB menu
1
In the Misc >Transition >Key/ME/FTB menu, press
[FTB].
2
Turn the knob to set the number of frames.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knob.
Knob Parameter Adjustment Setting values
1 No AUX bus
selection 1 to 24
3
Turn the knob to set the number of frames.
Knob Parameter Adjustment Setting values
1 Transition
Rate Transition rate 0 to 999
(frames)
Setting the AUX Mix Transition Rate
For details of AUX mix transitions, see “AUX Mix
Transitions” (page 119).
1
In the menu control block, press the top menu
selection button [MISC], then select VF3 ‘Transition’
and HF3 ‘Aux Mix.’
The Misc >Transition > Aux Mix menu appears.
2
Use one of the following methods to select the target
AUX bus (odd-numbered bus) in the status area list.
•
Directly press the list in the status area.