Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 136 / 706

USO
RESTRITO
136
Key Adjustments (Menus)
Knob Parameter Adjustment Setting values
1 H Phase Key horizontal
position Left edge
position value
shown
2 V Phase Key vertical
position Top edge
position value
shown
Ch
a
p
te
r 4
K
e
y
s
Parameter group [2/2]
Notes
In the emboss function it is not possible to set [Fine
Key] on.
•
When the edge type is normal, drop border or
shadow, enabling the [Fine Key] function keeps
[Key Drop] on.
•
When applying a border to the key edge, enabling
the [Fine Key] function halves the border width
setting range.
Setting Key Drop Mode
1
In the Edge menu, press [Key Delay Mode].
The Key Delay Mode menu appears.
2
In the <Key Delay Mode> group, press [Key Drop] to
set key drop mode.
On: Key drop mode on
Off: Key drop mode off
To set the key fill/key source position
Press [8H Mode] is switch between 8H mode and 4H
mode.
On: 8H mode
Off: 4H mode
To fix key fill/key source to key drop off mode
In the <Key Delay Mode> group, press [Frame Delay],
turning it on.
Notes
This function uses the resizer, and therefore the expected
result of the setting may not be obtained if conditions do
not allow the resizer to be used.
Carrying out a color mix for the key edge
fill matte
When you select ‘Matte’ for the edge fill of a border, drop
border, or shadow, you can create a combination of color
1 and color 2 using a wipe pattern generated by the
dedicated pattern generator.
1
In the <Edge Fill> group of the Edge menu, select
[Matte], then press [Matte Adjust].
The edge fill Matte Adjust menu appears.
2
In the <Edge Matte> group, select [Mix Color],
turning it on.
3
Adjust the following parameters.
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Softness of
pattern edge 0.00 to 100.00
3 Pattern Pattern number
1 to 24
a)
a) The patterns are the same as standard wipes. For details, see “Wipe
Pattern List” in Appendix (page 357).
To select the pattern, display the Mix Pattern Select
menu by pressing [Mix Pattern] in the edge fill Matte
Adjust menu.
After selecting one of the patterns (standard wipe
patterns 1 to 24) displayed in the Mix Pattern Select
menu, you can adjust the following parameters.
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Softness of
pattern edge 0.00 to 100.00
4
Adjust color 1 and color 2.
To adjust color 1 press [Color 1], and to adjust color 2
press [Color 2], turning it on respectively, and adjust
the following parameters.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
5
If required, set the pattern modifiers.
When turning [Position] on and setting the pattern
position
Knob Parameter Adjustment Setting values
1 Position H Horizontal
position
–200.00 to
+200.00
a)
2 Position V Vertical position –200.00 to
+200.00
a)
a) See page 169 .