Sony MVS-8000X System, User Manual

Page: 1028 / 1310

Ap
pend
ix
(V
olume
2
)
1028
About the Macro Attachment List Display
About the Macro Attachment List Display
The Button column in the macro attachment list displayed in the status area of
the Macro >Attachment menu screen shows character strings which identify
macro attachment assigned buttons. Each of these character strings is in fact a
combination of characters shown in the Button(1), Button(2), and Button(3)
columns in the following tables.
For example, if Block and Button(1) to Button(3) are combined as:
Block: P/P XPT
Button(1): UTIL1 Bus
Button(2): V
Button(3): XPT2
The Button column in the macro attachment list in the Macro >Attachment
menu screen shows “UTIL1 Bus V XPT2,” which means “utility 1 bus, video
signal, cross-point number 2.”
M/E and PGM/PST Banks
The following table shows only the macro attachment assignable buttons in the
PGM/PST bank.
For the M/E-1 (M/E-2 to M/E-4) bank, “P/P” in the Block Select and Block
columns changes to “M/E-1” (“M/E-2” to “M/E-4”) and “DSK” in the
Button(1) and Button(2) columns changes to “KEY.” The contents of the
Button(3) column do not change.