Sony MVS-6000 User Manual Download Page 334

Page: 334 / 400

Ch
apt

334

Overall Color Corrector Operations

Overall Color Corrector Operations

Enabling Color Corrector

To enable the functions of color corrector 1, for example, use the following
procedure.

In the CCR menu, press VF1 ‘CCR1’ and any HF.

In the <CCR> group, press [CCR], turning it on.

This enables the functions of color corrector 1.

Returning all color corrector settings to their defaults

In the <CCR> group, press [Unity].

A confirmation message appears.

Press [Yes].

This returns all color corrector settings to their defaults, whether [CCR] is
on or off.

Copy and Swap Operations

Copying color corrector data

In the CCR menu, press VF3 ‘Copy/Swap.’

The Copy/Swap menu appears.
The status area shows a copy source list on the left and a copy destination
list on the right.

Using any of the following methods, select the copy source data and copy
destination data.

• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.

Summary of Contents for MVS-6000

















































































































































































































































































































































































































Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands

Sony MVS-6000, User Manual

Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands