Sony MVS-6000, User Manual

Page: 23 / 400

23
Basic Video Processing
Chapt
er
1
MV
S-6
000 F
un
c
tion
s
Masks
A mask allows a part of the image to be replaced by the background or a key.
To prevent unwanted holes in the background, or if a key is not the desired
shape, you can correct this with a mask.
Resizer
This function allows you to apply effects, similar to a DME, such as zoom,
movement, or aspect ratio change to a part of a created key. You can use the
following operations.
• Two-dimensional transform of a key
• Resizer interpolation settings
• Resizer crop/border settings
• Resizer effect settings (mosaic, defocus)
For details, see Chapter 4 “Keys” (page 139).
Wipes
A wipe is a transition from the current video stream to a new video stream,
using a wipe pattern.
Changing the background by means of a wipe is referred to as a “background
wipe,” and inserting or deleting a key with a wipe is termed a “key wipe.”
There are two types of wipe: those that can be selected in a common transition,
and those that can be selected in an independent key transition.
You can also specify the wipe direction, or set the pattern position, applying
various changes and modifiers to the selected wipe pattern.
For details, see Chapter 5 “Wipes” (page 199).
DME Wipes
A DME wipe is a wipe transition that uses a DME effect to change from one
video image to the next.
There are two types of DME wipe: those which can be selected for a normal
transition, and those which can be selected for an independent key transition.
The patterns that can be used for a DME wipe are as follows.
Slide, Squeeze, Door, Flip tumble, Frame in-out, Picture-in-picture, 2D
trans, 3D trans, Mosaic, Defocus, Brick, and User programmable DME