Sony MVS-6000 User Manual Download Page 114

Page: 114 / 400

114

Selecting the Transition Type by a Menu Operation

Chapt

Selecting the Transition Type by a Menu
Operation

You can also select the required transition type by a menu operation.

In the M/E or PGM/PST menu, select first VF7 ‘Misc,’ then HF1
‘Transition.’

The Transition menu appears.

Select the required transition type in the <Transition Type> group.

The parameter settings can now be adjusted with the knobs according to
the selected transition type.

For details, see the following.
• “Super Mix Settings” (page 115)
• “Color Matte Settings” (page 116)

•

“Setting the Transition Rate” (page 120)

Note

When multi-program mode is selected in the Setup menu

(see “Settings for

Switcher Configuration (Config Menu)” in Chapter 20 (Volume 3)),

there

may be cases in which two or more transition types have been selected.

Summary of Contents for MVS-6000

















































































































































































































































































































































































































Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands

Sony MVS-6000, User Manual

Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands