7
GasLab Q2 displays and operating the device
Page 70 of
135
G a s Q u a l i t y A n a l y z e r
GasLab Q2
7.2.8 Display Archive and Display Modbus
Behind this icon is the Archive Main display.
The figures and the following notes are only examples, the actual setup is done
with the software enSuite. (See chapter 8)
In the first two lines, you can use the two
drop-down lists to select archive-
Group
and archive-
Channel
. After selecting and
clicking on
Show values
the selected
archive values are displayed.
The following functions are available in this
display:
Channel
(switch to another channel of the
group)
Delete content
(clear archive if rights given)
Time stamp
(Date of archive entry)
Ordinal no.
(automatically indent. number)
Value
(archived result)
Figure 7.36:
Display Archive Main display and Values
Behind this icon is the Modbus Main display The figures and the following notes
are only examples. The actual setup is done with the software enSuite. (See
chapter 8)
The main display contains all the registers in
ascending order. Each register number is a
link
to the detail display in the other
properties. After selecting and clicking on a
link, the display appears
Modbus register
with:
Area name
Register name
Register no:
Register content
Data obj. content
Last refresh:
Figure 7.37: Display Modbus Main display and
Modbus register
Additional information on data logging and modbus registers, see chapter 8.
Documents of the enCore FlowComputers (see www.docuthek.com) contain
also additional information on this general data management.
