manualshive.com logo in svg

Sony MSW-900, Operation Manual, Page: 223 / 388

Share
Download
Sony MSW-900 Operation Manual Download Page 223

4

Chapter 4  Adjustments and Settings for Recording

4-97

4-8 Adjustments and Settings

from Menus

The camcorder provides menus for adjustments and settings.

4-8-1 Setting the GAIN Selector Values

Before using the camcorder, use the GAIN SW page of the USER menu
to set the gains corresponding to the L, M, and H positions of the GAIN
selector, which switches the gain of the video amplifier.

Follow the procedure below to set the gain.

1

Set the MENU ON/OFF switch to ON.

The page that was on the screen when the last menu operation ended
appears on the viewfinder screen.

2

Turn the MENU knob until the GAIN SW page appears, and push
the MENU knob.

(Continued)

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments