manualshive.com logo in svg

Sony MSW-900, Operation Manual, Page: 219 / 388

Share
Download
Sony MSW-900 Operation Manual Download Page 219

4

Chapter 4  Adjustments and Settings for Recording

4-93

3

Turn the MENU knob to move the 

t

 mark to the item you want to

set, and push MENU knob.

The 

t

 mark to the left of the selected item changes to the 

z

 mark

and the 

z

 mark to the left of the setting changes to the ? mark.

4

Turn the MENU knob to select whether or not to display the selected
window, then push the MENU knob.

The 

z

 mark to the left of the selected item changes to the 

t

 mark

and the ? mark to the left of the setting changes to the 

z

 mark.

5

To continue setting other windows, repeat steps 3 and 4.

6

To end menu operations, set the MENU ON/OFF switch to OFF.

4-7-9 Confirming the Image of the Return Video

Signal on the Viewfinder

You can set whether or not the image of the return video signal input to
the GENLOCK IN connector is displayed on the viewfinder, using the
GENLOCK page of the MAINTENANCE menu.

1

Set the MENU ON/OFF switch to ON while pushing the MENU
knob.

The TOP menu appears.

(Continued)

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments