Chapter 4
Recording, Playback and File Transfer
Chapter 4
Recording, Playback and File Transfer
4-11
Auto feed playback
Auto feed playback is a function for feed mode
playback of the segment between a specified IN point
and OUT point.
By connecting this unit to a recorder VTR with a
RECEIVE STANDBY function (MAV-555/2000 etc.)
via the SDTI-CONTROL PANEL interface and
executing auto feed playback on this unit, you can
record the interval between the IN and OUT points on
the recorder.
1
On the HOME page of the function menu, set F4
(CTL/TC) to TC.
2
Start playback and, with the ENTRY button held
down, press the IN button at the point where you
want to set the IN point. To set the OUT point,
press the OUT button with the ENTRY button held
down.
3
With the DMC/FEED button held down, press
PREVIEW button. (Before starting, refer to step
1
of the previous section “Carrying out playback in
feed mode” and set the feed mode playback speed.)
The VTR prerolls to a point 5 seconds before the
IN point (this can be changed with item 001 of the
basic menu) and starts auto feed playback.
Playback stops after postroll for 2 seconds beyond
the OUT point.
The segment between the IN and OUT points is
recorded on the recorder.