Chapter 2
Location and Function of Parts
2-14
Chapter 2
Location and Function of Parts
2-1 Control Panels
ENTRY
IN
OUT
IN
OUT
AUDIO
PREVIEW
REVIEW
AUTO EDIT
DELETE
MEMORY
TRIM
DMC/FEED
qd
Editing control section
1
DMC/FEED button
To carry out recording of playback at any speed
between –1 and +3 times normal (between –1 and +2
times normal for Betacam SX), automatic playback,
and automatic editing.
For playback in feed mode, hold down this button and
press the PLAY button.
Playback in feed mode requires a setting of extended
menu item 111.
2
MEMORY indicator
When memorizing the playback speed using the DMC/
FEED button, this indicator flashes as the playback
speed is captured to memory, and lights continuously
once the speed is captured.
3
DELETE button
This deletes an existing edit point.
Hold down this button and press the IN, OUT, AUDIO
IN, or AUDIO OUT button which is lit, indicating an
existing edit point, to delete the corresponding edit
point. The button either goes off or flashes. When the
button flashes, it is necessary to set the deleted edit
point again.
To cancel the DMC mode, hold down the DMC/FEED
button and press the DELETE button.
4
TRIM buttons
Use these buttons to trim an edit point to single-frame
precision.
Hold down the IN, OUT, AUDIO IN, or AUDIO OUT
button, and press one of these buttons. The ‘+’ button
advances the corresponding edit point by one frame,
and the ‘–’ button sets it back by one frame.
Pressing one of these buttons while holding down the
PLAY button adjusts the tape speed by +8% or –8%
correspondingly. (Capstan override function)
5
Edit point setting buttons
IN button and OUT button
To set a video IN point or OUT point, hold down the
IN button or OUT button, and press the ENTRY
button.
After you have made the setting, pressing the IN
button or OUT button displays the video IN point or
video OUT point set in time data display area 2.
On the MSW-M2000E/M2000EP, you can set IN and
OUT points of an MXF file when sending it via a
network.
AUDIO IN button and AUDIO OUT button
In insert editing, to set an audio IN point or audio OUT
point separate from the corresponding video edit point,
hold down the AUDIO IN button or AUDIO OUT
button, and press the ENTRY button.
After you have made the setting, pressing the AUDIO
IN button or AUDIO OUT button displays the audio
IN point or audio OUT point set in time data display
area 2.
ENTRY button
Use this for setting edit points and so on.
• To set a video IN point or OUT point: Hold down the
IN button or OUT button, and press this button.
• To set an audio IN point or OUT point: Hold down
the AUDIO IN button or AUDIO OUT button, and
press this button.
• To send MXF files via a network: Hold down this
button , and press the PLAY button (MSW-M2000E/
M2000EP only).
• When the VTR is in File Transmission mode that
uses the control panel, and the number of the
destination server has been selected, the host name or
IP address of the destination server can be displayed
in the time data display area 2 by pressing this button.
1
DMC/FEED button
2
MEMORY indicator
3
DELETE button
4
TRIM buttons
5
Edit point setting buttons
8
PREVIEW button
6
REVIEW button
7
AUTO EDIT button