55
List of Menus
•In asi_to_sdi mode
Item number
Category
Item
Arguments
Function
C002
setup
frame_sync_ref
stream
The STC obtained from the input stream is
used as the reference for SDI output.
ref_in
The external analog composite input to the
REF IN connector is used as the reference
for SDI output.
Notes
• The analog reference must be a signal
such as black burst, with no amplitude
fluctuation.
• When ref_in is selected, the wordlength
for linear PCM audio samples is 16 bits.
C003
setup
sync_phase
0x600 to 800 to 9ff
Specifies any hexadecimal value from
0x600 to 0x9ff to enable fine adjustment of
the SDI output sync phase.
The adjustment range is ±18.9 µs.
C006
setup
rx_c_caption
off
Disables processing to put closed captions
transmitted as Picture user data on base
band.
on
Enables processing to put closed captions
transmitted as Picture user data on base
band.
Note
This item is effective only when
video_system is 525.
C051
setup
rx_audio_sg
off
Disables the internal test signal generator.
1 kHz
Enables the internal test signal generator
to output a 1 kHz sine wave.
silence
Enables the internal test signal generator
to output silence.
C052
setup
lip_sync
–20.000 to +00.000
Carries out lip sync fine adjustment.
to +20.000
Unit: ms
Note
When set to a negative value, note that
operation may not be guaranteed,
depending on the system status.
C091
setup
vitc_line1
off
Disables processing to put VITC
tarnsmitted as private data on base band.
10 to 18 to 20 (525)
Specifies line number to hold VITC
tarnsmitted as private data.
7 to 21 to 22 (625)
C092
setup
vitc_line2
off
Disables processing to put VITC
tarnsmitted as private data on base band.
10 to 18 to 20 (525)
Specifies line number to hold VITC
7 to 21 to 22 (625)
tarnsmitted as private data.
C101
setup
rx_program_no
00001 to 00200 to 65535 Specifies program number for decoding.
C102
setup
rx_packet_size
auto
Automatically recognizes input TS packet
size.
188
Sets input TS packet size to fixed 188 bytes.
204
Sets input TS packet size to fixed 204
bytes.